prev - next - index

Built-in functions



pre-defined functions

Some methods defined in the Kernel module can be called from everywhere, and are to be called like functions. You'd better think twice before redefining these methods.

` str

Performs str by a subshell. The standard output from the commands are taken as the value. This method is called by a syntax sugar form like `str`.

Array(arg)

Converts the argument to the array using to_a.

Float(arg)

Converts the argument to the float value.

Integer(arg)

Converts the argument to the integer value. If the argument is string, and happen to start with 0x, 0b, 0, interprets it as hex, binary, octal string respectively.

String(arg)

Converts the argument to the string using Kernel#to_s.

at_exit

Register the block for clean-up to execute at the interpreter termination.

autoload(module, file)

Specifies file to be loaded using the method require, when module accessed for the first time. module must be a string or a symbol.

binding

Returns the data structure of the variable/method binding, which can be used for the second argument of the eval.

caller([level])

Returns the context information (the backtrace) of current call in the form used for the variable $@. When level specified, caller goes up to calling frames level times and returns the context information. caller returns an empty array at toplevel.

The lines below prints stack frame:

for c in caller(0)
  print c, "\n"
end

catch(tag){...}

Executes the block, and if an non-local exit named tag submitted by the throw, it returns with the value given by the throw.

For example, the code below returns the value 25, not 10, and the some_process never be called.

def throw_exit
  throw :exit, 25
end

catch(:exit) {
   throw_exit
   some_process;
   10;
}

chop
chop!

Removes off the last character of the value of the variable $_ (2 characters if the last characters are "\r\n"). chop! modifies the string itself. chop makes a copy to modify.

chomp([rs])
chomp!([rs])

Removes off the line ending from the value of the variable $_. See String#chomp.

eval(expr[, binding[, filetag[, lineno]]])

Evaluate expr as a Ruby program. If the Proc object or the binding data from binding is given to the optional second argument, the string is compiled and evaluated under its binding environment.

When the expr contains nested methods, it is useful to have better traceback information than simply citing the eval and a line number. The filetag provides this in two ways. If it is left as the default (which is "(eval)") then there is no traceback into the nested methods. If it is set to anything else then there is full traceback information, and also the tag in the error message is changed to this value.

The lineno defaults to 1, and is used as the starting line number of expr when producing any error messages.

exec(command...)

Executes command as a subprocess, and never returns.

If multiple arguments are given, exec invokes command directly, so that whitespaces and shell's meta-characters are not processed by the shell.

If the first argument is an array that has two elements, the first element is the real path for the command, and the second element is for the argv[0] to execl(2).

exit([status])

Exits immediately with status. if status is omitted, exits with 0 status.

exit raises SystemExit to terminate the program, which can be handled by the rescue clause of the begin statement.

exit!([status])

Exits with status. Unlike exit, it ignores any kind of exception handling (including ensure). Used to terminate sub-process after calling fork.

fork

Does a fork(2) system call. Returns the child pid to the parent process and nil to the child process. When called with the block, it creates the child process and execute the block in the child process.

gets([rs])
readline([rs])

Reads a string from the virtual concatenation of each file listed on the command line or standard input (in case no files specified). If the end of file is reached, nil will be the result. The line read is also set to the variable $_. The line terminator is specified by the optional argument rs, which default value is defined by the variable $/.

readline functions just like gets, except it raises an EOFError exception at the end of file.

global_variables

Returns the list of the global variable names defined in the program.

gsub(pattern[, replace])
gsub!(pattern[, replace])

Searches a string held in the variable $_ for a pattern, and if found, replaces all the occurrence of the pattern with the replace and returns the replaced string. gsub! modifies the original string in place, gsub makes copy, and keeps the original unchanged. See also String#gsub.

iterator?

Returns true, if called from within the methods called with the block (the iterators), otherwise false.

load(file[, priv])

Loads and evaluates the Ruby program in the file. If file is not an absolute path, it searches file to be load from the search path in the variable $:. The tilde (`~') at begenning of the path will be expanded into the user's home directory like some shells.

If the optional argument priv is true, loading and evaluating is done under the unnamed module, to avoid global name space pollution.

local_variables

Returns the list of the local variable names defined in the current scope.

loop

Loops forever (until terminated explicitly).

open(file[, mode])
open(file[, mode]){...}

Opens the file, and returns a File object associated with the file. The mode argument specifies the mode for the opened file, which is either "r", "r+", "w", "w+", "a", "a+". See fopen(3). If mode omitted, the default is "r"

If the file begins with "|", Ruby performs following string as a sub-process, and associates pipes to the standard input/output of the sub-process.

Note for the converts from Perl: The command string starts with `|', not ends with `|'.

If the command name described above is "-", Ruby forks, and create pipe-line to the child process.

When open is called with the block, it opens the file and evaluates the block, then after the evaluation, the file is closed for sure. That is:

open(path, mode) do |f|
  ...
end

# mostly same as above

f = open(path, mode)
begin
  ...
ensure
  f.close
end
p(obj)

Prints human-readable representation of the obj to the stdout. It works just like:

print obj.inspect, "\n"

print(arg1...)

Prints arguments. If no argument given, the value of the variable $_ will be printed. If an argument is not a string, it is converted into string using Kernel#to_s.

If the value of $; is non-nil, its value printed between each argument. If the value of $\ is non-nil, its value printed at the end.

printf([port, ]format, arg...)

Prints arguments formatted according to the format like sprintf. If the first argument is the instance of the IO or its subclass, print redirected to that object. the default is the value of $stdout.

proc
lambda

Returns newly created procedure object from the block. The procedure object is the instance of the class Proc.

putc(c)

Writes the character c to the default output ($>).

putc(obj..)

Writes an obj to the default output ($>), then newline for each arguments.

raise([error_type,][message][,traceback])
fail([error_type,][message][,traceback])

Raises an exception. In no argument given, re-raises last exception. With one arguments, raises the exception if the argument is the exception. If the argument is the string, raise creates a new RuntimeError exception, and raises it. If two arguments supplied, raise creates a new exception of type error_type, and raises it.

If the optional third argument traceback is specified, it must be the traceback infomation for the raising exception in the format given by variable $@ or caller function.

The exception is assigned to the variable $!, and the position in the source file is assigned to the $@.

If the first argument is not an exception class or object, the exception actually raised is determined by calling it's exception method (baring the case when the argument is a string in the second form). The exception method of that class or object must return it's representation as an exception.

The fail is an alias of the raise.

rand(max)

Returns a random integer number greater than or equal to 0 and less than the value of max. (max should be positive.) Automatically calls srand unless srand() has already been called.

If max is 0, rand returns a random float number greater than or equal to 0 and less than 1.

readlines([rs])

Reads entire lines from the virtual concatenation of each file listed on the command line or standard input (in case no files specified), and returns an array containing the lines read.

Lines are separated by the value of the optional argument rs, which default value is defined by the variable $/.

require(feature)

Demands a library file specified by the feature. The feature is a string to specify the module to load. If the extension in the feature is ".so", then Ruby interpreter tries to load dynamic-load file. If the extension is ".rb", then Ruby script will be loaded. If no extension present, the interpreter searches for dynamic-load modules first, then tries to Ruby script. On some system actual dynamic-load modules have extension name ".o", ".dll" or something, though require always uses the extension ".so" as a dynamic-load modules.

require returns true if modules actually loaded. Loaded module names are appended in $".

select(reads[, writes[, excepts[, timeout]]])

Calls select(2) system call. Reads, writes, excepts are specified arrays containing instances of the IO class (or its subclass), or nil.

The timeout must be either an integer, Float, Time, or nil. If the timeout is nil, select would not time out.

select returns nil in case of timeout, otherwise returns an array of 3 elements, which are subset of argument arrays.

sleep([sec])

Causes the script to sleep for sec seconds, or forever if no argument given. May be interrupted by sending the process a SIGALRM or run from other threads (if thread available). Returns the number of seconds actually slept. sec may be a floating-point number.

split([sep[, limit]])

Return an array containing the fields of the string, using the string sep as a separator. The maximum number of the fields can be specified by limit.

format(format...)
sprintf(format...)

Returns a string formatted according to a format like usual printf conventions of the C language. See sprintf(3) or printf(3). In addition, sprintf accepts %b for binary. Ruby does not have unsigned integers, so unsigned specifier, such as %b, %o, or %x, converts negative integers into 2's complement form like %..f. supplying sign (+, -) or space option for the unsigned specifier changes its behavior to convert them in absolute value following - sign.

srand([seed])

Sets the random number seed for the rand. If seed is omitted, uses the current time etc. as a seed.

sub(pattern[, replace])
sub!(pattern[, replace])

Searches a string held in the variable $_ for a pattern, and if found, replaces the first occurrence of the pattern with the replace and returns the replaced string. sub! modifies the original string in place, sub makes copy, and keeps the original unchanged. See also String#sub.

syscall(num, arg...)

Calls the system call specified as the first arguments, passing remaining as arguments to the system call. The arguments must be either a string or an integer.

system(command...)

Perform command in the sub-process, wait for the sub-process to terminate, then return true if it successfully exits, otherwise false. Actual exit status of the sub-process can be found in $?.

If multiple arguments are given, system invokes command directly, so that whitespaces and shell's meta-characters are not processed by the shell.

See exec for the execution detail.

test(cmd, file [, file])

Does a file test. the cmd would be one of following:

throw(tag[, value])

Casts an non-local exit to the enclosing catch waiting for tag, or terminates the program if no such catch waiting. The tag must be the name of the non-local exit, which is either a symbol or a string. catch may not appear in the same method body. the value will be the return value of the catch. The default value is the nil.

trace_var(variable, command)
trace_var(variable) {...}

Sets the hook to the variable, which is called when the value of the variable changed. the variable must be specified by the symbol. the command is either a string or a procedure object. To remove hooks, specify nil as a command or use untrace_var.

trap(signal, command)
trap(signal) {...}

Specifies the signal handler for the signal. The handler command must be either a string or a procedure object. If the command is a string "SIG_IGN" or "IGNORE", then specified signal will be ignored (if possible). If the command is a string "SIG_DFL" or "DEFAULT", then system's default action will be took for the signal.

The special signal 0 or "EXIT" is for the termination of the script. The signal handler for EXIT will be called just before the interpreter terminates.

untrace_var(variable[, command])

Deletes the hook associated with the variable. If the second argument omitted, all the hooks will be removed. trace_var returns an array containing removed hooks.


prev - next - index

matz@netlab.co.jp